Category: sdr hardware

XMass_offer_ill_2_ver_on

SDR Radio equipment – It is time for a cool Christmas gift

Follow Quadrus SDR
facebooktwittergoogle_pluslinkedinrss

A smart Xmas gift? SDR radio Equipment!

Jingle waves, jingle waves, jingle all the way, oh what fun it is to not get socks this Holiday! Your children get the cutest vampire barbies, the latest Star Wars figures, and all the flying, beeping gadgets they asked for. Your wife is happy with her new shinny earrings because her friends and colleagues will be green with envy after Christmas. But what about you? Socks and ties again? No!

This Xmas should be different! Play safe and shop smart. Forget the huge watches and drones. You need something cool. What about an SDR Radio Equipment?

Top 3 ideas if you are interested in Ham Radio:

Beginner level – It is a beginning of a beautiful friendship with the waves. Check and buy Get on the Air with Hf digital Guide to know all what you need for becoming a Ham Radio.

Get_onDigital

Advanced level – Somebody dreaming of white Christmas. Who cares about snow? All you need is a really good HF antenna, get it here.

HF_antenna_illustration

Black belt Ham Radio fan level - Would you like to develop your Ham Radio station? Why don’t you enter the 21th century with an SDR platform like Quadrus SDR!

DRU-244A-1028bb

Have you ever heard about Black Friday? It is the day when the Christmas Shopping Season (your wife’s/girlfriends kind of madness) begins in the USA. In the last couple years, this day became known globally, so these days most everyone can make good bargains in November.

Our special offer Quadrus SDR Christmas Pack is available this Christmas only, from November 25th to December 14th.

The offer includes:

  • A DRU-244A card, which can be found in our webshop
  • 3 hours of VIP customer support from one of our seniors consultants – only available in this offer
  • Free shipping to anywhere on the globe

Hurry up, because the stock is limited, and if you order until December 6th, you are also getting a bonus:

http://spectrafold.com/quadrus/radio-software/application-testing/must-have-book-for-sdr-funs/

So, do you want the socks again? Or something really smart?

 

Share Quadrus SDR
facebooktwittergoogle_pluslinkedinmail
internal

Have your own HAM SWL radio station!

Follow Quadrus SDR
facebooktwittergoogle_pluslinkedinrss

Gadget of the past? HAM SWL radio station!

In most cases we write posts about unique designs and ides, which are useful for advanced level HAM SWL radios, e.g., this or that posts on software defined radio (SDR) technology. But what about the beginners? Well this post is for them! Ready, steady, HAM SWL Radio!

Some weeks ago I was surfing the internet looking for some new ideas for a special issue of Quadrus SDR. It was easy to find a creative idea for my problem, and to prove to my family that HF broadcasting is alive. We can access high quality radio service there based on new, digital operation mode (i.e., DRM), which has a very useful community for SDR fans. When I started to deal with HAM SWL radio, there were no opportunities such as the internet. It was ooch… 35+ years ago. We – the members of the community – talked to each other only using the radio at the club station or using our self-made radios at home, but it was an amazing experience that I never forget. I had my own HAM radio station at home – built with my own hands from scratch – with CW capability for the 80m ham radio band. Lovely, isn’t it? (and I was 17 years old when I made this…)

front internal top front

I have two sons. They are not interested in making, but they are professional in using gadgets. Like every teenager nowadays. Maybe my father said the same thing about my HAM radio equipment. Gadget.

Do or do not, there is no try

So, what about beginners? I found a very good post about how to start this kind of a hobby. Hobby? No! This is a way of life. I could not summarize this better then Gregory L. Charvat:

“The only way to get started is to build something. Start small, check out the QRP community, try making a single-conversion receiver, and move up to something with a crystal IF filter. Borrow and scale circuits from books such as these:

Or leverage complete ICs and modules like those from Mini-Circuits.  There is nothing like making that first long distance contact (DX) on radio gear you created from scratch.”

You can read the whole article on Hackaday.

But if you are more of a computer geek, you can switch to software implemented radio and start with less complex and less expensive SDRs or a professional one like Quadrus SDR from our webshop. Even I experienced that old fashioned radio moment Gregory mentioned above, when I first received a DRM station from Mubay, which was a very nice feeling for my radio infected heart. You can see the report on this reception here in the Quadrus SDR blog:
http://spectrafold.com/quadrus/radio-software/sdr-drm-receiver/

Further reading on DRM, the new digital HF broadcast technology:
http://spectrafold.com/quadrus/go/whitepaper-drm-broadcasts/

And don’t forget to share your success stories or questions regarding SDR issues with us on our Facebook pageTwitter page, or G+ community page. Be social; whatever is your preferred platform, we are there !

Bertalan, HA6QU

Share Quadrus SDR
facebooktwittergoogle_pluslinkedinmail
lpfl_v1

HF preselector filter

Follow Quadrus SDR
facebooktwittergoogle_pluslinkedinrss

Direct digital HF receiver

Earlier we’ve introduced the concept of direct digital receivers in this blog.

http://spectrafold.com/quadrus/digitizer-hardware/sdr-pre-selector-filter-direct-digital/

Furthermore, VHF/UHF direct digital filters discussed:

http://spectrafold.com/quadrus/radio-software/direct-digital-sdr-receiver/

http://spectrafold.com/quadrus/digitizer-hardware/direct-digital-uhf-sdr-radio-receiver-dru-244/

In this operation mode the ADC input has to be kept clean from various spectrum components in other Nyquist bands. The input preselector filter helps in selecting the right part of the given Nyquist band.

The HF preselector filter

In case of high performance reception of HF signals, the main challenge is to prevent interference from higher frequency VHF/UHF signals. This may be achieved with a Low-Pass Filter (LPF) cutting the components above say 30-32 MHz, but that depends on the reception requirements. We have to carefully construct the filter such that it provides sufficient attenuation in the 88-108 MHz FM band, where the highest level signals may be found usually. The input bandwidth of the DRU-244A hardware is up to 440 MHz, thus the input filter should attenuation in the upper VHF/UHF band as well. This can be ensured with careful design and implementation using small, surface-mounted components. If we are concentrating on real HF signals, and are not interested in lower band mid- or long-wave reception, the input should be clean from high level AM broadcast signals as well, usually present in the spectrum below 1.6 MHz. For this purpose, a High-Pass Filter (HPF) should be inserted in the signal path with a 1.6 MHz corner frequency.

HF preselector filter design and realization

To satisfy the requirements of the HF input preselector filter described above, we’ve designed an input filter block with a cascaded HPF and LPF using a professional filter design software. The approximation is elliptic, ensuring a cutoff at 40 MHz. The implementation is a small PCB containing the HPF and LPF sections with SMA connectors at the ends and a place for an optional choke for remote powering capabilities of an active receiver antenna.

The photo of the finished HF preselector filters:
lpfa
The measurement results up to 500MHz:

lpfb

The full design package of the HF preselector filter, including the schematic and layout design in Protel (Altium Designer) file format, are available for download.

Share Quadrus SDR
facebooktwittergoogle_pluslinkedinmail
cw

Performance testing of Software Defined Radios

Follow Quadrus SDR
facebooktwittergoogle_pluslinkedinrss

Performance testing of Software Defined Radios

Do SDRs perform better than conventional Superhet architecture radios? A big problem is that many of the traditionally used tests, which compare radios on league tables and in reviews, are not very relevant to SDRs due to fundamental differences in technology.
A very good article on this topic by Andrew Barron ZL3DW
Performance testing of Software Defined Radios

We already published a post on the sensitivity of the Quadrus SDR here:
http://spectrafold.com/quadrus/digitizer-hardware/sdr-receiver-sensitivity-test/

The published results are:
SSB -111 dBm at 10 dB S+N/N with 2.1 kHz bandwidth
CW  -119 dBm at 10 dB S+N/N with 400 Hz bandwidth

According to Andrew:

MDS (Minimum Discernible Signal)

MDS is a measurement of how sensitive the receiver is. It represents the weakest signal you can hear. You need it to be good if you want to hear very weak signals on a quiet band, for example when sunspots are poor or the band is closing. If the band is noisy the noise level coming in the antenna port will often be higher than the MDS so sensitivity is not as relevant.

In the test a signal is input to the receiver and the MDS is the input signal level when it shows as 3dB above the receiver noise floor. The MDS is better if the bandwidth of the receiver is reduced because a narrow bandwidth allows less noise in. So it is usually measured using a typical CW bandwidth of 500Hz and using a typical SSB bandwidth of 2.4kHz. It is normally checked on several bands as well. In most SDR receivers especially direct sampling (digital down conversion DDC) receivers you would expect the same performance on all bands. When you compare results relating to different radios, check that no attenuators or preamplifiers are in use. Most SDR receivers have an MDS better than -125dBm in 500Hz bandwidth and better than -115dBm in 2.4kHz bandwidth. Excellent receivers can achieve an MDS better than -130dBm in 500Hz bandwidth and better than    -120dBm in 2.4kHz bandwidth. SDRs with 8bit analog to digital conversion (ADC) will probably not be able to achieve that level of performance because of limited dynamic range.

It is not easy to compare the results, because we’ve measured in 400 Hz / 2.1 kHz bandwidth instead of 500 Hz / 2.4 kHz, and we’ve measured a 10 dB signal above the noise floor instead of 3 dB. However, we can do a very simple calculation of adding 7 dB to the 3/10 dB measurement level difference.

So our performance testing comparable to this reference article is:
SSB -118 dBm at 3 dB S+N/N with 2.1 kHz bandwidth
CW  -126 dBm at 3 dB S+N/N with 400 Hz bandwidth

Share Quadrus SDR
facebooktwittergoogle_pluslinkedinmail

bpf-meas1

SDR FM Pre-selector filter

Follow Quadrus SDR
facebooktwittergoogle_pluslinkedinrss

SDR FM Pre-selector filter and direct digital SDR

In one of my earlier posts I’ve already described the direct digital SDR architecture and the possibility to receive in higher Nyquist bands.

http://spectrafold.com/quadrus/digitizer-hardware/sdr-pre-selector-filter-direct-digital/

If we are to use this possibility, however, we have to carefully avoid spectrum overlaps, for which we need an analog SDR FM pre-selector filter. Let me show you how I’ve designed and implemented one.

SDR FM pre-selector filter design

SDR FM Filter design

FM boadcast is in the 88-108 MHz band in most countries, which is in the 80-120 MHz 3rd Nyquist zone of our 40 MHz converter. The relative bandwidth is ~20% (20/98=0.24), which suggests to use an High-Pass Filter (HPF) – Low-Pass Filter (LPF) structure.

We can approximate the filter using the Dyonusos filter design software. I’ve manually fine tuned the autogenerated results, so that the band edge insertion loss falls in the 1-3 dB range while the inductor values are close to standard values. The capacitors can be implemented with parallel connected standard values. I’ve employed the same method for both the HPF and LPF filters, and decided to use 82 nH and one 100 nH inductor.

HPF90-res LPF110-res

HPF90-sch LPF110-sch
Filter implementation

After the design, I’ve collected the components, and utilized a previous PCB design to solder the components together.

FM boadcast filter

Measurement results

Before assembling the complete band-pass SDR FM filter, I’ve measured the high-pass and low-pass parts separately.

hpf90-meas lpf110-meas

Finally, I’ve connected them, thereby forming a Band-Pass Filter (BPF), and I’ve tested the close-in pass-band performance and the higher frequency response as well. The latter is important for rejection of miscellaneous signals, like DVB.

bpf-meas1 bpf-meas2

As expected, the amplitude response of the assembled structure is not so good, and we see more insertion loss, and also other degradation due to the inaccurate component values.

Conclusion

I’ve introduced a simple method to design and implement an SDR FM pre-selector filter. It is designed with a filter design software with some manual fine tuning and adjustments to achieve the right performance in the corner frequencies and for amplitude response. During this process, one has to take into account the standard chip inductor values, e.g., from the E6/12 component line. Non-standard capacitor values can be constructed with parallel connected smaller values. Due to the limited quality factor of the inductors, the insertion loss in only moderate. Due to the high tolerance of the components, the pass-band response is high. With tunable high-Q inductors we could reach better values in terms of insertion loss and response.

http://spectrafold.com/quadrus/digitizer-hardware/sdr-pre-selector-filter-direct-digital/

Happy SDR receiving!

Share Quadrus SDR
facebooktwittergoogle_pluslinkedinmail

P1012820-830x768_fimg

SDR pre-selector filter | Direct digital SDR

Follow Quadrus SDR
facebooktwittergoogle_pluslinkedinrss

What is direct digital SDR?

Software-Defined Radio (SDR) is a type of radio, where the analog signal is converted into the digital domain, and functionality is implemented in the digital domain employing signal processing algorithms. Conversion technology is limited in terms of bandwidth and frequency range, thus the right point for conversion has to be carefully chosen. Conversion can take place at the baseband, Intermediate Frequency (IF), or directly at the Radio Frequency (RF). In case conversion happens at the operating RF (likely after the pre-selector), we can talk about direct digital SDR.

Domain converter frequency parameters

Analog-to-Digital Converters (ADCs) and Digital-to-Analog Converters (DACs) are employed to bridge the analog and digital domains on the radio hardware platform. Converter parameters determine how we can use them in the radio implementations.

Instantaneous bandwidth

One of the most important parameters is the real-time bandwidth or instantaneous bandwidth. It is determined by the sampling frequency of the converter, and according to the Nyquist law, it is equal to the half of the sampling frequency.

Frequency range

The other very important parameter is bandwidth or frequency range of the converter itself. Usually, this is determined by the circuits involved: it starts with the analog components, and includes circuitry within the converter, like the sample-and-hold stage. The Nyquist criteria states that the bandwidth should be equal to the half of the sampling rate in order for a perfect reconstruction in both time and frequency domains. Hence, there is a possibility to generate and sample higher frequency signals too, if we keep the bandwidth inside half of the sampling rate. In other words, we can use upper half bands, called Nyquist bands. If we have a wider spectrum, we have to be sure not to alias or fold from higher Nyquist bands to the baseband. The anti-aliasing filter or SDR pre-selector is used for that propose. If we are talking about ADCs and receivers, the latter terminology is employed.

Frequency parameters of the DRU-244A SDR hardware

We’ve used 80 MHz as sampling frequency for our hardware platform, so, the instantaneous bandwidth is 40 MHz. We can tune to radio channels within this band using on-board hardware DDCs. The input bandwidth of the ADC itself is 650 MHz. This is the -3 dB point of the input stage, and it has no brick wall slope.

bandwidth response

This means that we can use not only the 0-40 MHz first Nyquist band, but upper bands, like 160-180 MHz, too using an SDR per-selector filter. However, the bandwidth is degraded, because we have to use some other input analog circuits, like input low-noise preamplifiers and leveling attenuators. Still, it is possible to receive with good results up to 500 MHz. See this post about satellite signal reception at 435 MHz:
http://spectrafold.com/quadrus/digitizer-hardware/direct-digital-uhf-sdr-radio-receiver-dru-244/
http://spectrafold.com/quadrus/radio-software/direct-digital-sdr-receiver/
For more information, please see AN-835 application note from Analog Devices:
http://www.analog.com/static/imported-files/application_notes/AN-835.pdf

Designing SDR pre-selector filter

You can find a lot of different filter design tool kits on the net, which will approximate your requirements, and determine the right components for different realizations. I think, the best practice, – which I’ve used in the last decades – is to cascade a separate high-pass and  a low-pass filter if the relative bandwidth is high. On the other hand, the band-pass approach will work for narrow band (<10%) filters. I always like to use standard components. E12 or E24 1% components will do good job for anti-aliasing and pre-selection filter implementations. Usually, the capacitors are the easier part, inductors may have to be manually wound and tuned.

Bandpass filter for VHF bands

Using the Dyonusos filter design software, I’ve designed a band-pass SDR pre-selector filters utilizing the capacitive coupled resonator structure, which is my favorite. The relative bandwidth is higher than 10%. During the approximation phase, I like to see ~40 dB attenuation at the Nyquist band corner. However, only 30 dB could be achieved by the high-pass filter at the lower band edge frequency if the insertion bandwidth was kept at 20 MHz. You can see the calculated filter response, the filter values, and the measured response after having very careful fine tuned the inductors in the circuits. Seems easy enough, but you need some practice to reach such results with a 5th order resonator filter. For beginners interested in designing and implementing filters, let me suggest to start with 3rd order structures and standard complements as close as possible to the calculated component values.

Approximation:

SDR pre-selector BPF 160-200 SDR pre-selector BPF 120-160

Elements:

SDR pre-selector BPF 120-160 SDR pre-selector BPF 160-200

Realization:

SDR pre-selector BPF 160-200 SDR pre-selector BPF 160-200

Measurements:

SDR pre-selector BPF 160-200 SDR pre-selector BPF 120-160

Share Quadrus SDR
facebooktwittergoogle_pluslinkedinmail

dru-nb01

Using Quadrus SDR with a laptop

Follow Quadrus SDR
facebooktwittergoogle_pluslinkedinrss

Why a laptop?

Even until fairly recently, the resources offered by an average laptop were insufficient to run wide-band, multi-channel SDR applications. Thus, the original SDR hardware was designed with more capable desktop computers in mind. However, with increasing laptop performances, it is now finally possible to run even the more challenging applications. The obvious advantages are flexibility and mobility, and by now they are omnipresent in our everyday lives.

Connecting Quadrus SDR to a laptop

The Quadrus SDR platform’s phase-coherent SDR hardware digitizer board is a standard PCI slot card. This form factor does not allow us to connect it directly to a laptop. Fortunately, we have the possibility to use an external PCI slot extender, and place the DRU-244A card into one of the external slots. There are several products in the market, they differ mainly in the number of slots and connections. One of the most well known suppliers is Magma, who offers different solutions, like the one slot PCI extension. They also offer products with different interfaces to the laptop: ExpressCard 34mm and 54mm versions, and CardBus/PCMCIA card with 1 m or 1.5 m cable length.

1slotB_xl_0 1SlotPCI_connection

Beyond this well known and proven supplier, we’ve just found another very cost-effective external PCI solution. Polotek offers a solution based on the ExpressCard interface. It essentially contains one PCIe and one USB interface. Their idea is very simple: use the PCIe connection with a high-speed extender cable and add a PCIe-PCI brige chip on the external slot card. Their other approach is to use a standard USB3 cable manufactured in high volume. However, the connection itself is not following the USB3 protocol, they simply utilize the high-speed differential wire pair within the cable to connect the PCIe slot to the extender card, which has the PCIe-PCI bridge.

polotek2 polotek

Testing the DRU-244A phase-cohernet SDR hardware digitizer with a laptop

You can place low volume orders at several places:
http://www.aliexpress.com/item/It-go-notebook-pci-slot-laptop-pci-express-external-sound-card-graphics-card/1487192711.html
http://www.aliexpress.com/store/product/Free-shipping-Laptop-ExpressCard-34-to-2-PCI-express-16x-slot-Riser-Card-Compatible-with-PCI/1452034_2055140423.html
http://www.aliexpress.com/store/product/Free-shipping-ExpressCard-To-2-PCIe-slots-adapter-Laptop-Express-Card-to-dual-PCI-e-16x/211886_32242097031.html
I’ve ordered from Aliexpress, and received the package with the components as shown on the web.

dru ext1 dru ext2

Setting up the hardware and installing the DRU driver was trivial. The single issue, I’ve noticed, is that the Plug-and-Play functionality is somehow not working properly in all cases. Sometimes I’ve lost connection to the card after some sleep or screen saving actions. In these cases, I just removed and reconnected the ExpressCard and re-initiated the Plug-and-Play cycle. I had no chance to test it with any other computer than my Dell power notebook with an i7 processor.

dru driver machine

driver1 driver2 driver3

 

 

Share Quadrus SDR
facebooktwittergoogle_pluslinkedinmail
Img0509-LR_fimg

SDR hardware manufacturing batch arrived

Follow Quadrus SDR
facebooktwittergoogle_pluslinkedinrss

Design and preparation of manufacturing

The DRU-244A digitizer SDR hardware went trough some design polishing and preparation for mass production without close interaction with the original design team.

DRU-244A-design

Verification and testing

Before releasing the SDR hardware, the manufacturing plant is responsible for the full verification and testing of all functionality. They need to program the clock chip that provides the different sampling clocks and other miscellaneous clocks of the architecture as well. After that, the initial EEPROM content of the PCI interface should be loaded. If the card is working fine with external power supply at this point, it can be placed into a PC for further testing using its test software. In this phase, the RF parameters are tested.

dru-sample-app dru-sample-fequ

Beta testing with selected users

After all the cards were tested in the factory, we’ve immediately shipped some of them to our beta testers. They have the latest version of the SRM-3000 receiver SDR software available to use with the card. We are looking for the initial responses from them, and appreciate any suggestions for further improvements.

14100+-100KHz-20140316-111835-0984

Share Quadrus SDR
facebooktwittergoogle_pluslinkedinmail
Sensitive SDR receiver

Sensitive SDR receiver for sensitive information

Follow Quadrus SDR
facebooktwittergoogle_pluslinkedinrss

[Sensitive SDR receiver for sensitive information]

Sensitive SDR receiver based on the DRU-244A digitizer SDR hardware platform

The DRU-244A digitizer board was designed and implemented for building radio receivers. It contains a 16 bit resolution low-noise Analog-to-Digital Converter (ADC). It has a low-noise input preamplifier and an input attenuator in front of the ADC. The low-noise preamp provides input sensitivity as low as -111 dBm in SSB reception mode with 2.1 kHz bandwidth and 10 dB SNR. With external preamplifier it could be as low as -122 dB. If you would like to see more detailed test results on SDR receiver sensitivity click here:
http://spectrafold.com/quadrus/digitizer-hardware/sdr-receiver-sensitivity-test

Practical results for receiving weak signals

I’ve already made some practical tests with my very simple inverted-V shaped wire dipole antenna. It was used in the country side, so there was less human made noise than in the crowded city or urban area.

Sensitive SDR receiver as long range DRM SDR

If you are not a professional radio enthusiast with a vast knowledge of exact broadcasting carrier frequencies, one of the easiest ways to find some DRM radio stations is to just look for its unique spectrum in the HF band. The DRM spectrum is a very typical, noise like, wide band signal. This is exactly what I did; I simply connected the antenna to my receiver through a 30 MHz low-pass input pre-selection filter, and started visually looking for DRM radio signals in the spectrum. I was really surprised when one of the first signal received turned out to be be coming from India and the next one was from South Africa. Not bad. The SDR receiver seems to be real sensitive if I am able to decode these signals in the middle of Europe.

drm01 drm02

If you are interested in how the SDR receiver was connected to the Dream DRM decoder software, please read these posts:

http://spectrafold.com/quadrus/radio-software/virtual-audio-connection/

http://spectrafold.com/quadrus/radio-software/sdr-drm-receiver/

Sensitive SDR receiver for secret transmissions

One of my other favorite signals in the HF spectrum is the UVB-76 Buzzer on 4555KHz.

https://en.wikipedia.org/wiki/UVB-76

http://priyom.org/military-stations/russia/the-buzzer.aspx

http://www.wired.co.uk/magazine/archive/2011/11/features/enigma?page=all

As the frequency is well known, I could simply dial it in to the SDR receiver software, and immediately see the transmission on my screen and hear the famous “Buzzer” tone on the speaker with very high Signal-to-Noise Ratio (SNR).

Receiving the UVB-76 Buzzer on 4625KHz with sensitive SDR receiver

There are a lot of mysterious signals in the HF spectrum. The sensitivity of our receiver – especially with an external, low-noise per-amplifier and a good antenna – makes it possible to listen to even the most remote signals.

listener Contact014

Share Quadrus SDR
facebooktwittergoogle_pluslinkedinmail

Coherent multi-channel SDR receiver

Follow Quadrus SDR
facebooktwittergoogle_pluslinkedinrss


[Coherent multi-channel SDR receiver with coherently sampling SDR hardware development platform]

Coherently sampling hardware architecture

The DRU-244A digitizer hardware contains 4 Analog-to-Digital Converter (ADC) chips connected to a common sampling clock source. The output of the ADCs is routed to the on-board Field-Programmable Gate Array (FPGA) through Digital Signal Processors (DSPs), which contain four Digital Down Converters (DDCs). The decimated samples are routed to the host PC via the PCI bus. On of the main features of the DRU-244A hardware is that all of the sampling and decimation is phase coherent and synchronous. The sampling clocks and even the start of the DDCs are synchronized employing trigger signals implemented in hardware. The samples can be kept in sync within the SRM-3000 SDR receiver software by explicitly turning on this feature on the control panel.

Proving the coherent operation with off-line processing

Signal connections

In this experiment, we’ve used a passive or resistive power splitter to provide the signals for each of the RF inputs of the digitizer card. As a first step, each RF input was connected with cables of the same length to the splitter. Later 8 m of RG-223 coaxial cable was inserted in one of the signal paths to add phase shift to one of the channels.

Testing coherent SDR channels with zero deg splitter
Testing coherent SDR channels with zero deg splitter
Testing coherent SDR channels with delay in one input
Testing coherent SDR channels with delay on one input

During the tests we’ve used three test frequencies 4.5 MHz, 9.4 MHz, and 16.1 MHz. The receiver was tuned to the given signal in USB operation mode and generated a ~1 kHz sine wave at the audio output.

Recording coherent channels

One can easily record a channel’s audio output in the SRM-3000 SDR radio software to an (almost) standard wave file, which then may be processed off-line using other tools. In the following examples, we’ve used the Matlab environment to display the time domain wave form and to calculate the power spectra and phase information of signals. As mentioned above, in order to make coherent SDR channel recordings, the user has to explicitly turn on the synchronous recording mode on the user interface.

Switch coherent recording in SRM SDR receiver
Turning on coherent recording in the SRM SDR receiver

We’ve made recordings for only the first channels of each DDC block. As a reminder, the DRU-244A SDR receiver platform actually contains four dedicated hardware DDCs in each signal processor. It has one wide band signal input, so, it makes sense to record only one of the output channels, as the phase delay will be the same for the rest of the channels of the same DSP.

The internal architecture of the coherent SDR hardware
The internal architecture of the coherent SDR hardware

Initial calibration results

The output was recorded to a wave file, and subsequently read into Matlab to display the time domain. Not surprisingly, we see the four (noisy) sine waves with no phase difference among them.

Coherent SDR channels with zero deg at 16.1MHz
Coherent SDR channels with zero deg at 16.1 MHz
Coherent SDR channels with zero deg at 9.4MHz
Coherent SDR channels with zero deg at 9.4 MHz
Coherent SDR channels with zero deg at 4.5MHz
Coherent SDR channels with zero deg at 4.5 MHz

Signals with phase delays

As the next step, we’ve inserted an 8 m RG-223 coax cable into one of the signal paths. The phase delay of the cable is frequency dependent. The calculated phase delays follow for the frequencies at hand:
4.5 MHz – 65.44 deg
9.4 MHz – 136.71 deg
16.1 MHz – 234.15 deg
* Zo = 50 ohm, C=101 pF/m, Z0=SQRT(L/C), t=SQRT(L*C)
* PH=360*F[Hz]*L[m]*t[s], t=5.05 ns/m

Coherent SDR channels with 234 deg at 16.1MHz
Coherent SDR channels with 234 deg at 16.1 MHz
Coherent SDR channels with 136 deg at 9.4MHz
Coherent SDR channels with 136 deg at 9.4 MHz
Coherent SDR channels with 65 deg at 4.5MHz
Coherent SDR channels with 65 deg at 4.5 MHz

Frequency domain phase delay processing

It is very hard to observe phase delay in time domain, thus, we’ve employed frequency domain calculations as well for the delay. The complex spectrum of the input signal was calculated with FFT. It contained the amplitude and the phase of each signal. We can get the phase difference between the different signal paths by subtracting the calculated phases.
As we can see on the figures, the phase differences give the same value as the previously calculated estimates.

Amplitude and phase difference spectrum of coherent SDR channels 4.5MHz Amplitude and phase difference spectrum of coherent SDR channels at 4.5 MHz Amplitude and phase difference spectrum of coherent SDR channels 4.5MHz (zoom) Amplitude and phase difference spectrum of coherent SDR channels at 4.5 MHz (zoom)
Amplitude and phase difference spectrum of coherent SDR channels 9.4MHz (zoom) Amplitude and phase difference spectrum of coherent SDR channels at 9.4 MHz (zoom) Amplitude and phase difference spectrum of coherent SDR channels 16.1MHz (zoom) Amplitude and phase difference spectrum of coherent SDR channels at 16.1 MHz (zoom)

Conclusion

The Quadrus SDR receiver platform – including the DRU-244A digitizer card and the SRM-3000 SDR receiver software – are ready to provide phase coherent signals. This platform feature makes it possible to use it in interferometric direction finding and digital beam forming applications. It is possible to record signals as standard windows wave files for off-line processing.

Downloads related to this content: Phase coherent SDR cahnnel records with read script (Matlab) Share Quadrus SDR
facebooktwittergoogle_pluslinkedinmail